At Stars End Clone Warrior - Prequel Obi Wan

[awhite89]

Hello there,

I normally don't post here but I thought I'd share my installed clone warrior because I'm just tickled with how well it turned out. There is still a little programming to do but overall it's nearing the finish line.

Features:
-Dual switch setup using a brass tactile switch and the shtok neopixel switch PCB for the brass valve. This was by far the hardest part to achieve due to how the red/ copper thumbscrew is set up. This was very difficult to get perfect and I'd recommend to make this a 1 switch setup moving forward since it's as simple as printing an insert for the brass valve
-High amp kill switch with cover
-28mm bass speaker connected via the shtok speaker pcb
-USBC charging and data access via pommel removal
-6 pole rotary PCB for a fully removable core
-Removable 18650 battery
-Shadowfoil props 5mm accent led for the bottom accent to act as a battery level indicator
- Accent led strips along the spine of the chassis as well as one additional for a battery level indicator
-Top half chassis retained by the brass valve, it is possible to remove this part of the chassis but it's not necessary and I won't be able to on mine since I made the red thumbscrew work as a switch


I hope you all like the video and MTFBWY

 

[MojaveTrooper]

Hello there,

I normally don't post here but I thought I'd share my installed clone warrior because I'm just tickled with how well it turned out. There is still a little programming to do but overall it's nearing the finish line.

Features:
-Dual switch setup, this was by far the hardest to achieve due to how the red/ copper thumbscrew is set up. This was very difficult to get perfect and I'd recommend to make this a 1 switch setup moving forward since it's as simple as printing an insert for the brass valve
-High amp kill switch with cover
-28mm bass speaker
-USBC charging and data access via pommel removal
-6 pole rotary PCB for a fully removable core
-Removable 18650 battery
- Accent led strips along the spine of the chassis as well as one additional for a battery level indicator

I hope you all like the video and MTFBWY

Awesome install as always man

 

[awhite89]

Awesome install as always man

Thank you. I try my best
Getting a removable 18650 in there was rough but it still doesn't compare to making that red thumbscrew functional. Getting the red thumbscrew setup perfectly was probably just as hard as getting the wattos junkyard Dooku red trigger switch to function as a switch with an led to light it up