Done / Completed BTTF - full sticker set for Doc's Plutonium case

[Roland]

DONE / COMPLETED

If you are a proud owner of a replica of Doc Brown's Plutonium case (bought or homemade) from "Back to the Future", you might need all the different stickers. A full sticker set for the case contains:

- 9 big diamond shaped stickers "RADIOACTIVE III" (printed on vinyl)
- 12 small stickers for the Plutonium canisters "CAUTION RADIOACTIVE MATERIAL" (printed on vinyl coated paper)
- 1 die-cut sticker "PLUTONIUM HANDLE WITH CARE" (black vinyl)

My stickers have accurate dimensions, shape and design (correct fonts etc.). The black die-cut sticker comes with a clear carrier film which can be removed after sticking.


A few preview pictures of my stickers (the first picture shows the full set that you get):







Sales list:

1) ataru72ita - 2 sets - paid - shipped 08/03/16 - tracking number: RL738966052DE
2) HanSewLow - 2 sets - paid - shipped 08/03/16 - tracking number: RL738231135DE
3) Dminor - 1 set - paid - shipped 08/03/16 - tracking number: RL738966070DE
4) JKRIB - 2 sets - paid - shipped 08/04/16 - tracking number: RL739394197DE
5) Ojobenito - 1 set - paid - shipped 08/04/16 - tracking number: RL739052039DE
6) sparrow85 - 1 set - paid - shipped 08/03/16 - tracking number: RL739232367DE
7) Spiderstella - 2 sets - paid - shipped 08/04/16 - tracking number: RL739394206DE
8) Petowalker - 2 sets - paid - shipped 08/24/16 - tracking number: RL740094230DE
9) alloccosol - 2 sets - paid - shipped 08/24/16 - tracking number: RL740094243DE
10) krell101 - 1 set - paid - shipped 09/12/16 - tracking number: CY743483724DE
11) shoxxo - 1 set - paid - shipped 10/05/16 - tracking number: RL741207595DE
12) dstone - 1 set - paid - shipped 10/05/16 - tracking number: RL741207542DE
13) Nicofett - 1 set - paid - shipped 10/05/16 - tracking number: RL741207600DE
14) doriang - 1 set - paid - shipped 10/05/16 - tracking number: CY732764865DE
15) SqueakyArmor - 1 set - paid - shipped 10/05/16 - tracking number: RL741537172DE
16) halliwax - 1 set - paid - shipped 12/27/16 - tracking number: RL742646942DE

Tracking website: https://www.deutschepost.de/sendung/simpleQuery.html?locale=en



And here are pictures of the screen used case where you can see all the stickers and where to place them. There are two versions of the Plutonium case. The case in Doc's house has the die-cut "PLUTONIUM HANDLE WITH CARE" sticker, the case in the mall scene doesn't have that sticker.

 

[ataru72ita]

Interested in 2 full plutonium case sets, please contact me with instructions, I'm in Italy!

Regards,

Alberto

 

[Roland]

Interested in 2 full plutonium case sets, please contact me with instructions, I'm in Italy!

Regards,

Alberto

ataru72ita

Thanks for your interest, Alberto. Two sets plus shipping, that's $26. Please send your payment to my PayPal address rpf@zubcic.com and don't forget to send me your postal address and your RPF name. Thanks!

 

[HanSewLow]

I'm in for 2 sets please!

 

[Roland]

I'm in for 2 sets please!

HanSewLow

Thanks for your interest. Price for two sets incl. shipping is $26.

ataru72ita

Payment received, thank you!

 

[HanSewLow]

Payment sent.

 

[MattgomeryBurns]

This is awesome Roland! I'll be grabbing a set in the future - I'm thinking about getting one made by Anvil at some point.

 

[Roland]

Payment sent.

HanSewLow

Payment received. Thank you!

This is awesome Roland! I'll be grabbing a set in the future - I'm thinking about getting one made by Anvil at some point.

MattgomeryBurns

Thanks for your interest!

If you need help with the measurements of the case, just ask me!

 

[VanOaksProps]

Count me in for a set. Money sent.

 

[VanOaksProps]

Do we know the actual dimensions of Doc's case? Is it 22"x16"x13"?

 

[JKRIB]

Do we know the actual dimensions of Doc's case? Is it 22"x16"x13"?

This is a good thread to refer to

http://www.therpf.com/showthread.php?t=81736

I believe it is that or close to it

- - - Updated - - -

Please put me down for 2 sticker sets @Roland

PAID just now

 

[VanOaksProps]

Thanks JKRIB!

 

[Roland]

Do we know the actual dimensions of Doc's case? Is it 22"x16"x13"?

According to my own calculations, the screen used case is 20" x 15.5" x 12.5" (width x depth x height). The distance between the two locking levers is 5.5". The interior foam is 19.5" x 15", the tube inserts are 3" wide and the distances between themselves and between them and the outer walls is 1.5". The walls are 0.25" thick.

Edit: Those dimensions are measured from edge to edge. If you count the round corners, too, the dimensions are a little bit larger.

Count me in for a set. Money sent.

... Please put me down for 2 sticker sets @Roland

PAID just now

Dminor and JKRIB

Payments received, thank you!

 

[JKRIB]

Yeah. I'm getting a case from Anvil. Same that Randy got

1/4" yellow ABS
23 x 16 3/8 x 13 1/8" (Outside Diameter, ball corner to ball corner).
Inside diameter very similar to what Roland recommended

So I think the stickers should look well proportioned

12 cylindrical foam cutouts, the ones they have saved are 3'' diameter holes and 5.5'' deep

If the canisters are 3'' diameter and 6'' tall and the rod is 7'', then I think that will look correct as well.
From the movie, some of the canisters look about .50 inches to .75 inches higher than the foam?

Anywaaay.. can't wait for the stickers!

 

[VanOaksProps]

Yeah. I'm getting a case from Anvil. Same that Randy got

1/4" yellow ABS
23 x 16 3/8 x 13 1/8" (Outside Diameter, ball corner to ball corner).
Inside diameter very similar to what @Roland recommended

So I think the stickers should look well proportioned

12 cylindrical foam cutouts, the ones they have saved are 3'' diameter holes and 5.5'' deep

If the canisters are 3'' diameter and 6'' tall and the rod is 7'', then I think that will look correct as well.
From the movie, some of the canisters look about .50 inches to .75 inches higher than the foam?

Anywaaay.. can't wait for the stickers!

What did it set you back?


Sent from my iPhone using Tapatalk

 

[JKRIB]

What did it set you back?


Sent from my iPhone using Tapatalk

It's about $260 and shipping. But I think that's all we should talk about, for the case, in this thread..

unless Roland wants to chime in with any more info

 

[VanOaksProps]

It's about $260 and shipping. But I think that's all we should talk about, for the case, in this thread.

Thanks! I was just curious about the case, so it worked out perfectly.

SaveSave​

 

[Roland]

...But I think that's all we should talk about, for the case, in this thread..

I don't mind. Talk about whatever you want.

The problem is that any informations posted in the classifieds could be lost someday after deleting the thread.

 

[sparrow85]

Payment sent for 1 set

 

[VanOaksProps]

Roland when did you send the stickers? Just trying to figure out if they should have arrived by now.


Sent from my iPhone using Tapatalk