how do i paper mache pulp pepakura ? i have seen a guy do it with paper mache pulp and glue, i tried it but the pulp was too wet and it ruind the mask i wanted to try hardstock card paper but its to hard to glue the pep file together and superglue is not an option so how can i put paper mache pulp on my A4 regular printer paper without ruining it? and dont suggest fiberglass i dont use it.
pepakura paper mache pulp method
- Thread starter Majed
- Start date
EyeofSauron
Master Member
tbh, doing it on standard printer paper, this will never work. neither would resin, fiberglass, or anything else. its not stable enough
vicious
New Member
i can think of a few things you can try, you mainly just need to strengthen the paper or make it stiff so it will hold the pulp.
you can paint on a layer of non-wrinkle rubber cement, or perhaps us a spray on truck bed liner and spray the inside of the pep. of course you can go find some classic hair spray and coat the whole thing a few times till it is stiff as a board. just a couple ideas for you
you can paint on a layer of non-wrinkle rubber cement, or perhaps us a spray on truck bed liner and spray the inside of the pep. of course you can go find some classic hair spray and coat the whole thing a few times till it is stiff as a board. just a couple ideas for you
SuperFLY
Well-Known Member
the real question should really be why is cardstock 'too hard' to work with?
with normal paper you'll never get the right shape, it'll warp, tear, and generally just not work.
if you're having problems joining the edges, just make sure to score the lines where you need to (on the correct side depending on mountain or valley folds) and it'll work perfectly.
are you using hot glue? some prefer superglue but hot glue is my weapon of choice. quick to dry and easy to work with (imo)
because glue dries faster with normal paper byt with hardstock it takes me longer and its less flexable
EyeofSauron
Master Member
you are aware that its not supposed to be flexible? thats like saying i want my motorcycle helmet to be flexible.
also, it takes me longer is no excuse.
either you do something or you dont. and in the end, how much time have you spent trying to find a solution to get it done with printerpaper?
if you wouldve done it with cardstock, you would be done allready.
sorry, i have no pity if someone wants to make something and not invest time in it.
also, it takes me longer is no excuse.
either you do something or you dont. and in the end, how much time have you spent trying to find a solution to get it done with printerpaper?
if you wouldve done it with cardstock, you would be done allready.
sorry, i have no pity if someone wants to make something and not invest time in it.
Contec
Master Member
Not if you use superglue or a gluegun
i already said glue gun is not an option captain!
still not safe otherwise i would've gone with fiberglass resin, and bondo,and still superglue is amazing but i dont want to have to wear gloves or anything to protect myself when i make costumes. any other ideas captain?
some of us don't have time, you may not have a life or work to do, but others are not the same you either suggest a good solution, or you get out because you're not helping with this nonsense i asked for people who can help me with the materials i have,if you dont have anything that can help me, then help yourself by shuting up.
Use the cardstock and the gel super-glue. The cardstock is really the only way to go and the gel type super-glue stays in place really well and you do not need gloves to work with it on pep projects. Just be sure to use small amounts of the glue and don't overdo it. Remember, be nice. Eyeofsauron has alot of experience and really knows what he is talking about. Good luck!
I have used a two-part epoxy glue from a dollar store in the past to strengthen and create a water resistant base, before applying paper mache etc. Simply mix, spread evenly with an old credit card or scrap cardboard and allow to dry. Usually 5 minutes. This may help
Being epoxy, it shouldn't warp the paper, but work in small sections or try a few tests first.
Just a suggestion.
Being epoxy, it shouldn't warp the paper, but work in small sections or try a few tests first.
Just a suggestion.
kumba
New Member
Thing i have done goes like this: made pep helmet, resin it from outside, take two roles of toilet paper take it in bowl with water then press it to take almost all water from it after that you can put it in blender and mix it with wood glue and some kind of wall repair powder to make paste like mix that can be applied by hand let it dry about 24 hours, it won't deform your pep piece because it has one coat of resin on it, after drying sand it (sands easy), primer it, paint it. Two days job without time you spend making your helm or whatever.
SuperFLY
Well-Known Member
You've already been given your answers. There are no magical solutions, some things just have to be done a certain way.
I would also suggest you check the attitude. There's no need to be afraid, angry or whatever.
This forum has some of the kindest most helpful people I have ever dealt with and do not deserve it; especially when they're only trying to help you out.
What's the old saying.. don't bite the hand that feeds you?
Take a step back, re-read your posts and have a think how it came across.
Good luck.
I would also suggest you check the attitude. There's no need to be afraid, angry or whatever.
This forum has some of the kindest most helpful people I have ever dealt with and do not deserve it; especially when they're only trying to help you out.
What's the old saying.. don't bite the hand that feeds you?
Take a step back, re-read your posts and have a think how it came across.
Good luck.
Last edited:
Similar threads
