Hello everyone,
I'm thinking about doing a run of my Skulls of Touganda that I have recently finished.
These are 3D printed in resin, given minimal electronics, & magnets so they hold themselves together or be displayed apart. It will also have both the 4th Skull ring and The Phantoms' ring (raw 3d printed prototype shown, final items will be painted accordingly) that will be roughly scaled to requested size for the middle fingers (due to the nature of resin printing, there is some shrinkage so I have to oversize it and the fit may be slightly loose or slightly tight, but since they are resin, I strongly advise not wearing them daily).
Right now, everything is 3D printed and each skull takes half a day to print (baring no failures). If there is enough interest, I will make molds for the Gold and Silver skulls but keep the Jade skull 3D printed for the glass/gemstone effect the translucent green resin provides (and to avoid the annoyance of air bubbles that comes with casting clear resins).
The options are:
Raw ring kit - $35 (shipping included within USA)
Contents:
*Items are resin
*May request specific ring size
Finished ring kit - $85 (shipping included within USA)
Contents:
*May request specific ring size
Raw Full size kit - $175 + shipping
Contents:
*items are resin
*may upgrade to light up 4th skull ring for extra $20
Finished prop - $375 + shipping
Contents:
** Each set takes 1.5-2 weeks to make due to the 3D print speed & post processing, extensive painting process involved with the Gold and Silver skulls, and wiring/magnet placement
I'm thinking about doing a run of my Skulls of Touganda that I have recently finished.
These are 3D printed in resin, given minimal electronics, & magnets so they hold themselves together or be displayed apart. It will also have both the 4th Skull ring and The Phantoms' ring (raw 3d printed prototype shown, final items will be painted accordingly) that will be roughly scaled to requested size for the middle fingers (due to the nature of resin printing, there is some shrinkage so I have to oversize it and the fit may be slightly loose or slightly tight, but since they are resin, I strongly advise not wearing them daily).
Right now, everything is 3D printed and each skull takes half a day to print (baring no failures). If there is enough interest, I will make molds for the Gold and Silver skulls but keep the Jade skull 3D printed for the glass/gemstone effect the translucent green resin provides (and to avoid the annoyance of air bubbles that comes with casting clear resins).
The options are:
Raw ring kit - $35 (shipping included within USA)
Contents:
- Raw Phantom ring
- Raw 4th Skull ring
*Items are resin
*May request specific ring size
Finished ring kit - $85 (shipping included within USA)
Contents:
- 1 painted Phantom ring
- 1 painted 4th skull ring
*May request specific ring size
Raw Full size kit - $175 + shipping
Contents:
- 1 Gold skull (resin color is random)
- 1 Silver skull (resin color is random)
- 1 Jade skull (translucent green resin)
- 1 skull ring (close to requested size)
- 1 Phantom ring (close to requested size)
- 6 eye gems with pre-wired led's attached
- (each pair is matched and you will need drill the hole for the gem placement in the eye sockets prior to painting)
- 6 magnets to glue inside
- 3-cr2032 coincell batteries with battery cage
- 6 velcro strips to attach battery cage inside skull
- 3 click switches to turn eyes on/off
- Extra wiring to complete led circuit
- Shrink tubing to cover exposed connections
*items are resin
*may upgrade to light up 4th skull ring for extra $20
Finished prop - $375 + shipping
Contents:
- 1 Gold skull
- 1 Silver skull
- 1 Jade skull
- 1 Phantom ring
- 1 "4th" skull ring
** Each set takes 1.5-2 weeks to make due to the 3D print speed & post processing, extensive painting process involved with the Gold and Silver skulls, and wiring/magnet placement
Attachments
-
All three 02.jpg203 KB · Views: 162
-
Top down.jpg207.7 KB · Views: 172
-
Silver 01.jpg285.7 KB · Views: 198
-
Jade 02.jpg301.5 KB · Views: 165
-
Jade 01.jpg326.9 KB · Views: 245
-
Gold 02.jpg302.7 KB · Views: 192
-
Gold 01.jpg330.1 KB · Views: 205
-
Silver 02.jpg232.1 KB · Views: 195
-
Raw Gold.jpg127.6 KB · Views: 177
-
Raw Jade.jpg164.8 KB · Views: 214
-
Phantom Ring.jpeg1.4 MB · Views: 136
-
4th skull ring.jpeg1.4 MB · Views: 156
-
Minis.jpg115.3 KB · Views: 222
-
9439AAEC-D69A-450E-AAB0-B6CFC9096EBB.jpeg2.9 MB · Views: 197
-
4AD46100-9564-4B48-9F00-5A27655FC9B6.jpeg1.4 MB · Views: 231
-
3F842F06-B330-46D7-91E0-329C90D968AD.jpeg3.8 MB · Views: 199
-
3E8225C8-C0AA-40C8-B6CD-E1E861B56D03.jpeg1.3 MB · Views: 164
Last edited: