Terminator 2 T-800 Endoskeleton Bust / Mask (T2 Endoskull)

Re: Terminator 2 T-800 Endoskull Mask (T2 Endo Skull)

Shame it is not the full skull instead of the mask.

Mask as in wearable? If it really is 1:1, then only a kid will be able to wear it as the skull is actually smaller than the face.
 
Re: Terminator 2 T-800 Endoskull Mask (T2 Endo Skull)

Yeah I wish it was the full skull too. It's not confirmed whether it's wearable, but I doubt it. I think it's more so a display piece.

I wonder if they are using the term 'mask' just so they can manfacture a 1:1 replica piece, since the actual prop license for the T2 Endoskull might be tied up with other companies.

The studio may have granted the mask license as long as they make it distinct from being an exact 1:1 replica. So even though it's a 1:1 scale replica, it's just the front of the skull. Of course this is all just conjecture at this point.
 
Re: Terminator 2 T-800 Endoskull Mask (T2 Endo Skull)

So who does the best full skull then? I haven't seen any runs going on for one. I'd love to add one to my collection.

Sent from my Pixel using Tapatalk
 
Re: Terminator 2 T-800 Endoskull Mask (T2 Endo Skull)

Interesting. Thanks for passing this along.
 
Re: Terminator 2 T-800 Endoskull Mask (T2 Endo Skull)

Vivek, that looks great for any price....(!)

Them teeth for example(not to mention the rest as well) are waaaaay better than anything Sideshow's ever produced.

My only complaint would be the eyes. But it's supposed to be a "mask" so.... MEH
 
Re: Terminator 2 T-800 Endoskull Mask (T2 Endo Skull)

Yep, sometimes an accurate Endoskull's look is thrown off by the teeth alone. I hope they consider doing a full version down the line.

So who does the best full skull then? I haven't seen any runs going on for one. I'd love to add one to my collection.

https://www.therpf.com/showthread.php?t=99172&p=1418668&viewfull=1#post1418668
Check the above linked thread post (#10) to know about the various releases from the past.

No company is manufacturing new T2 Endoskulls at the moment. Chronicle Collectibles does sell one based on the design from Terminator Genisys.
 
Re: Terminator 2 T-800 Endoskull Mask (T2 Endo Skull)

PRE-ORDER the Pure Arts T-800 Art Mask and SAVE 25%! | SKYNET'S ARMY
Visit the page for more details.


https://vip.purearts.com/
Pre-order page.

Promo code: PA-T800-Mask

Get 25% for $299. Later regular price will be $389.

T2 ART MASK Pre-Order First Announcement! - YouTube

Audio is muffled here. Watch the original Vimeo one on the order page.


  • Mask replica, non-wearable
  • Handcrafted patina on electroplated resin
  • LED eyes and base
  • Table/wall display
  • Scale: 1:1 scale
  • Product Size: 20”
  • Product Weight: TBD
  • Manufacture: PURE ARTS LIMITED
  • License: STUDIOCANAL
  • Certificate of authenticity
  • SKU: PA001TE2
  • Shipping : October/December 2017


img_20171010_1101391463581327.jpg


DSC01063X2.jpg


DSC01062X2.3.jpg


DSC01065XL-1.jpg


DSC01066X2.jpg


T-800_View05X2-1000x667.jpg


DSC01075X2-1000x667.jpg


DSC01080%EF%BC%88X2%EF%BC%89-1000x667.jpg


DSC01096X3-1000x667.jpg


Light-up base

T-800_View03X-1000x667.jpg


DSC01156X4-1-1000x667.jpg


DSC00503XLOGO-1-1000x667.jpg


DSC00501XLOGO-1-1000x667.jpg


DSC01150XLOGO-1-1000x667.jpg


DSC01160X3-1000x667.jpg
 

Attachments

  • img_20171010_1101391463581327.jpg
    img_20171010_1101391463581327.jpg
    351.5 KB · Views: 276
  • img_20171010_1101391463581327.jpg
    img_20171010_1101391463581327.jpg
    351.5 KB · Views: 336
  • DSC01063X2.jpg
    DSC01063X2.jpg
    1.4 MB · Views: 883
  • DSC01063X2.jpg
    DSC01063X2.jpg
    1.4 MB · Views: 396
  • DSC01062X2.3.jpg
    DSC01062X2.3.jpg
    1.3 MB · Views: 857
  • DSC01062X2.3.jpg
    DSC01062X2.3.jpg
    1.3 MB · Views: 396
  • DSC01065XL-1.jpg
    DSC01065XL-1.jpg
    1.2 MB · Views: 499
  • DSC01065XL-1.jpg
    DSC01065XL-1.jpg
    1.2 MB · Views: 419
  • DSC01066X2.jpg
    DSC01066X2.jpg
    1.2 MB · Views: 425
  • DSC01066X2.jpg
    DSC01066X2.jpg
    1.2 MB · Views: 380
  • T-800_View05X2-1000x667.jpg
    T-800_View05X2-1000x667.jpg
    84.5 KB · Views: 438
  • T-800_View05X2-1000x667.jpg
    T-800_View05X2-1000x667.jpg
    84.5 KB · Views: 334
  • DSC01075X2-1000x667.jpg
    DSC01075X2-1000x667.jpg
    88.6 KB · Views: 323
  • DSC01075X2-1000x667.jpg
    DSC01075X2-1000x667.jpg
    88.6 KB · Views: 409
  • DSC01080%EF%BC%88X2%EF%BC%89-1000x667.jpg
    DSC01080%EF%BC%88X2%EF%BC%89-1000x667.jpg
    77.1 KB · Views: 339
  • DSC01080%EF%BC%88X2%EF%BC%89-1000x667.jpg
    DSC01080%EF%BC%88X2%EF%BC%89-1000x667.jpg
    77.1 KB · Views: 264
  • DSC01096X3-1000x667.jpg
    DSC01096X3-1000x667.jpg
    72.9 KB · Views: 353
  • DSC01096X3-1000x667.jpg
    DSC01096X3-1000x667.jpg
    72.9 KB · Views: 407
  • T-800_View03X-1000x667.jpg
    T-800_View03X-1000x667.jpg
    89.3 KB · Views: 380
  • T-800_View03X-1000x667.jpg
    T-800_View03X-1000x667.jpg
    89.3 KB · Views: 310
  • DSC01156X4-1-1000x667.jpg
    DSC01156X4-1-1000x667.jpg
    87.7 KB · Views: 344
  • DSC01156X4-1-1000x667.jpg
    DSC01156X4-1-1000x667.jpg
    87.7 KB · Views: 336
  • DSC00503XLOGO-1-1000x667.jpg
    DSC00503XLOGO-1-1000x667.jpg
    99.9 KB · Views: 282
  • DSC00503XLOGO-1-1000x667.jpg
    DSC00503XLOGO-1-1000x667.jpg
    99.9 KB · Views: 275
  • DSC00501XLOGO-1-1000x667.jpg
    DSC00501XLOGO-1-1000x667.jpg
    84.1 KB · Views: 334
  • DSC00501XLOGO-1-1000x667.jpg
    DSC00501XLOGO-1-1000x667.jpg
    84.1 KB · Views: 355
  • DSC01150XLOGO-1-1000x667.jpg
    DSC01150XLOGO-1-1000x667.jpg
    75.6 KB · Views: 269
  • DSC01150XLOGO-1-1000x667.jpg
    DSC01150XLOGO-1-1000x667.jpg
    75.6 KB · Views: 273
  • DSC01160X3-1000x667.jpg
    DSC01160X3-1000x667.jpg
    61.2 KB · Views: 352
  • DSC01160X3-1000x667.jpg
    DSC01160X3-1000x667.jpg
    61.2 KB · Views: 384
Last edited by a moderator:
Re: Terminator 2 T-800 Endoskull Mask (T2 Endo Skull)

Looks great. But calling it a mask is really odd!
 
Re: Terminator 2 T-800 Endoskull Mask (T2 Endo Skull)

Yep, especially when it's not even wearable.

And like I mentioned before, I think it's a way to produce and promote a product when they don't have the specific license.

Like when a company who has the costume license, but don't have a prop license are supposed to promote their prop replica product as a "costume accessory".

I wonder if they are using the term 'mask' just so they can manufacture a 1:1 replica piece, since the actual prop license for the T2 Endoskull might be tied up with other companies.

The studio may have granted the mask license as long as they make it distinct from being an exact 1:1 replica. So even though it's a 1:1 scale replica, it's just the front of the skull. Of course this is all just conjecture at this point.
 
Last edited:
Re: Terminator 2 T-800 Endoskull Mask (T2 Endo Skull)

Tempted. Not sure about just buying the face plate. A whole head would be better and they could still call it a "non-wearable" mask. My AP Stormtrooper helmet had "space mask" on the customs declaration to get around Star Wars licensing.
 
Re: Terminator 2 T-800 Endoskull Mask (T2 Endo Skull)

It's not bad, but I got my HCG bust for a similar price, and that is way better
 
Re: Terminator 2 T-800 Endoskull Mask (T2 Endo Skull)

the shipping is taking the p...s $ 160 to the UK

Shipping takes the p..s on everything. Generally I find shipping to be based on weight, but they also take cubic volume into the equation and charge the higher amount.

Given this is resin, it will have some weight and being 1:1 with a stand, won't be small.
 
Re: Terminator 2 T-800 Endoskull Mask (T2 Endo Skull)

the company has listened to me and dropped the shipping by $60 so my words might have been strong but it worked as everyone now saves on shipping
 
Re: Terminator 2 T-800 Endoskull Mask (T2 Endo Skull)

Got a reply to my email last week when I asked them why there hasn't been any update on their site/social media nor any promotions elsewhere and whether other retailers will carry this product. This was supposed to ship in December.

"Thank you for reaching us!

The masks are ready, the boxes are being printed and the foams are being made in order to packed it properly for shipping; this should take around 30 days.

As soon as it is ready, we will inform the community and make it available"
 
The just released a battle damaged version. Pretty cool looking.

 
Back
Top