2015 Wonderfest - sneak peek at 16yr old's start for next year

[furqueron]

OK, one more Came across these shots on the camera card. At WF, he was awarded 1 bronze, 3 silvers, 2 golds and the Iwata Best Teen Award.

Slightly off topic. This is one of his gold awarded models. I'd been playing around with some photo tips Matt Mrozek gave me on photographing miniatures. Still have a learning curve to go on learning to photo miniatures, but the photos are handy

When I can make room to setup for another set of shots, I'll post some picks of his Daemons of Khorne Bloodthirster that received the gold and the Iwata Best Teen awards at this year's 2017 Wonderfest.

He really loves handpainting and freehanding. No decals on this one!

 

[furqueron]

<deleted>

 

[furqueron]

Here's some closeups of the tappet valve.

View attachment 735134

 

[furqueron]

First tests on props for side-engine pods. Test was for post-n-hole fit and also seamline. Not too bad for first try.

 

[furqueron]

She wasn't quite ready to enter at Wonderfest, so he showed her as a "display only". We rolled into Louisville around 4:30am and he spent till 11am getting her together. He wants to finish all the detailing on her before he enters her for award consideration.

the only downside to Wonderfest is that due to display size limitations she has to be displayed in a "C" configuration. A lot of folks thinks the display is 2 or 3 ships fighting, once they get up close and look, they realize it's just one ship.

He got tons of positive feedback from a lot of folks. Thanks to everyone who took he time to talk to him!

Next stop Eaglequest...no display size limitaions, so next year we'll use a pic or two from this years Eagleqest on the Wonderfest display.

 

[furqueron]

Eaglequest results: the Knight was selected to be included in an upcoming issue ofFinescale Modeler covering Eaglequest.

OK, one more Came across these shots on the camera card. At WF, he was awarded 1 bronze, 3 silvers, 2 golds and the Iwata Best Teen Award.

Slightly off topic. This is one of his gold awarded models. I'd been playing around with some photo tips Matt Mrozek gave me on photographing miniatures. Still have a learning curve to go on learning to photo miniatures, but the photos are handy

When I can make room to setup for another set of shots, I'll post some picks of his Daemons of Khorne Bloodthirster that received the gold and the Iwata Best Teen awards at this year's 2017 Wonderfest.

He really loves handpainting and freehanding. No decals on this one!

View attachment 735108
View attachment 735109

- - - Updated - - -

Wonderfest results: he entered Khorne and was awarded a gold and Best Teen. Will post a pic when I find one.

- - - Updated - - -

Kygo wasn't quite ready to enter at Wonderfest, so he showed her as a "display only". We rolled into Louisville around 4:30am and he spent till 11am getting her together. He wants to finish all the detailing on her before he enters her for award consideration.


the only downside to Wonderfest is that due to display size limitations she has to be displayed in a "C" configuration. A lot of folks thinks the display is 2 or 3 ships fighting, once they get up close and look, they realize it's just one ship.


He got tons of positive feedback from a lot of folks. Thanks to everyone who took he time to talk to him!


Next stop Eaglequest...no display size limitaions. So next year we'll use a pic or two from this years Eagleqest at Wonderfest.

 

[furqueron]

what does it take to move the Kygo? The rear seat of a crew cab pickup along with the bed with a camper shell.


- - - Updated - - -

A couple of pics of the Kygo from Eaglequest, which is a competition sponsored by Squadron in Grapevine, Tx. These were taken during the setup. Currently at kes about 4 hours to get her put together. Had to maake a new support rod first thing the next day to get the hulls to lineup...so the ball joints don't quite lineup yet in these photos.

 

[furqueron]

Found a pic of the Kygo setup w new rod and all hulls aligned.

 

[furqueron]

Some parts for the rotary engines fresh off the printer (well, fresh a few weeks ago). The rotaries will be in a push/pull configuration in outboard pods mounted on the rear hull. Ala WW I Airships. Saw a discussion lighting and voltage in another thread so including the pic of his "test-bed" for lighting and motors. The arduino for the steppers is in the upper left and has two motor controller shields stacked on it. The lighting sketches for the guns in the middle hull are currently (pun) being rewritten to be "multi-threaded"...e.g. To not use the sleep() and use a set of milli timer arrays instead.