Bioshock infinite Vigor bottles

transceiverfreq said:
I'm joining in on this build with needtodestroy. We just are getting some studio space and this will be a great build for us.

Also, we plan on filling a few of our bottles with these cocktails:
POmAbp2.png
Click to expand...

where does this come from?
 
Thanks for those hi-res stickers, they're so much better than my remakes.

Edit: @YoungPaddy1: Thanks for that extra shot of Undertow, I hadn't seen the side before. I'll have to fix my model. Does anyone know how the lower tentacles are laid out? They're under his thumb in that pic.
 
Last edited:
Hey there! So I created an account simply for this forum, because I loved the game so much and I think what you guys do/ are doing is amazing! (and as the name suggests, I have no talent at this what so ever)

I wanted to run something by you guys: Do you think there could be a 3D printer version of some of the vigors that you just attach to a bottle? Someone 3D prints an octopus and tentacle, and lays it on top of a bottle and uses the stopper? I was looking at shapeways and would love to do it. Or maybe a keychain version of Charge? I frankly would like to use these bottles some day as a holder for fine alcohols, like a crystal set. I know that was a lot of info, but I am just super excited to see what you guys do!
 
This is one of the coolest things I've seen and I wanted to give some suggestions (or at least offer some ideas)! I think a Cholula hot sauce bottle (the 12 oz one) would be a decent fit for the Devil's Kiss bottle. All the work I've seen so far in here is pretty incredible. Keep up the good work everyone!
 
@notalent I've been thinking about printing the bottles on a smaller scale. I was thinking closer to 2"-3", printing in frosted plastic, painting it, and sticking an LED in each. If I could miniaturize the LED circuit, I'd probably sell the keychain set.

Here's my Charge model, and I tried my best to adapt my Undertow to YoungPaddy's revelation:
TyYDeXb.gif
E3t4ZVx.gif
 
KodyCOBHC said:
This is one of the coolest things I've seen and I wanted to give some suggestions (or at least offer some ideas)! I think a Cholula hot sauce bottle (the 12 oz one) would be a decent fit for the Devil's Kiss bottle. All the work I've seen so far in here is pretty incredible. Keep up the good work everyone!
Click to expand...

It looked similar to a beer bottle shape and color to me, I was thinking like a Magic Hat bottle.
 
BeShifty said:
@notalent I've been thinking about printing the bottles on a smaller scale. I was thinking closer to 2"-3", printing in frosted plastic, painting it, and sticking an LED in each. If I could miniaturize the LED circuit, I'd probably sell the keychain set.

Here's my Charge model, and I tried my best to adapt my Undertow to YoungPaddy's revelation:
TyYDeXb.gif
E3t4ZVx.gif
Click to expand...

You may want to check out this thread featuring both LEDs and colored FUD.
 
BeShifty said:
@notalent I've been thinking about printing the bottles on a smaller scale. I was thinking closer to 2"-3", printing in frosted plastic, painting it, and sticking an LED in each. If I could miniaturize the LED circuit, I'd probably sell the keychain set.

Here's my Charge model, and I tried my best to adapt my Undertow to YoungPaddy's revelation:
TyYDeXb.gif
E3t4ZVx.gif
Click to expand...

I would be all over that! Please keep me posted, and if there is anything I can do to help let me know! I would still love to have a charge that is a full on bottle, do you think the best route is to just make a clay overlay on a bottle?
 
I dont know really depends on the quality but I was thinking of selling both painted resin casts and unpainted ones a little cheaper.
 
zodiac said:
It looked similar to a beer bottle shape and color to me, I was thinking like a Magic Hat bottle.
Click to expand...
That Magic Hat bottle seems to be closer to the in game bottle. I figured i would use a Cholula bottle because of the slim neck it has and how that might fit inside the devil lady a bit better. Plus, the mouth of the bottle is smaller like the in game bottle mouth.
 
This tweet was posted by Ken Levine:
"Ken Levine ‏@IGLevine 23h

RT @KrisSteinz: @IGLevine ken please tell me there are plans to make replicas of the vigor bottles... - we just might."

Looks like we might get some official vigor bottles too!
 
After scaling my bottle reference to my hand Im pretty sure its 2" diameter for the round labels.
Ill have some progress worth showing within a week, I had to brush up on my female anatomy.
 
vru3Sof.jpg


Hey guys... I was directed here from Reddit... This is my Shock Jockey vigor
I am still working on the Jockey... open to suggestions as I am unable to find one in the correct position.
 
Are we talking about the 'sticker' including the embossing around it? Because my Shock Jockey, with the sticker and metal around it at 1.75" in diameter, clocks in at 11" tall. Does 11" sound right for the bottle?

Also, what would a good wall thickness be for the bottle? I've got it at 5mm right now, and ShapeWays has it at $160.

Edit: As for keychain-sized bottles, does anyone have ideas for LED circuits? Push button on the bottom, switch on the back, etc...
 
Last edited:
You must log in or register to reply here.

Similar threads

george bonilla
Where to get plastic beer bottles long neck flat bottom
Replies
2
Views
510
filmcrafts29
F
StaggzCosplay
Bioshock fully upgraded pistol
Replies
4
Views
1,133
StaggzCosplay
StaggzCosplay
TexasRaider
Casablanca's Kentucky Hill/Vichy Water bottles & Table Lamp
Replies
7
Views
1,002
joberg
joberg
StaggzCosplay
Bioshock Props and Replicas
Replies
1
Views
1,347
StaggzCosplay
StaggzCosplay
SBurrow
Replica BLiX Bottles From Zoey 101 (and various shows)
Replies
1
Views
2,893
lolamartinez
lolamartinez
Back
Top