Ever since I've started the clan hilts project I've scoured the web for more and more references and while working on the Shaak ti hilt I was looking for more hilts that used the same construction (like Barriss offee) and one was the Cin Drallig hilt. However thar particular hilt does not really exist, its more of a post movies hilt that was detailed after the fact. In the prequels a stunt hilt was often used by Nick Gillard (master stunt coordinator) which was made for his character Cin Dralling. Nick's favorite hilt was kit fisto's so this is why it resembles it.
Lucasfilm later made the Lightsaber collection book where they show this as Cin Drallis canon hilt.
One thing that I noticed is that in the illustration avobe it seems that the image was flipped or the illustrarot just drew the hilt resversed. You can see that its a mirror image of this illustration also on the book
So this version will be the idealized canon version based on the first image but with the second image layout/orientation.
The key features besides the compatibility of sections with the previous clan series are the following:
1. Aluminum, real needle bearings and O-rings. Overall length 280mm
2. 2 button setup. The buttons are the beveled LEDs.
3. All knobs and beveled LEDs have the same threading meaning you can swap them if you want.
4. Can fit a 28mm speaker
5. Basic chassis design available for download
6. 2Switch + 2pixel PCB available for purchase (for ease of install). This is the same or similar than the one available for the Fisto hilts
7. Box is included. Artwork by Christian Cruz as always.
8. Installation options will be added later. As per my previous projects this will be done by Giovanny from Aldani Customs
9. Weathering option will be available
At the moment I have quoted 50 units in total of each; this can change based on the demand. However 50 minimum will be made to keep the cost low.
Final Cost: $275
Interest list is now open. Thank you for your support as always.
Lucasfilm later made the Lightsaber collection book where they show this as Cin Drallis canon hilt.
One thing that I noticed is that in the illustration avobe it seems that the image was flipped or the illustrarot just drew the hilt resversed. You can see that its a mirror image of this illustration also on the book
So this version will be the idealized canon version based on the first image but with the second image layout/orientation.
The key features besides the compatibility of sections with the previous clan series are the following:
1. Aluminum, real needle bearings and O-rings. Overall length 280mm
2. 2 button setup. The buttons are the beveled LEDs.
3. All knobs and beveled LEDs have the same threading meaning you can swap them if you want.
4. Can fit a 28mm speaker
5. Basic chassis design available for download
6. 2Switch + 2pixel PCB available for purchase (for ease of install). This is the same or similar than the one available for the Fisto hilts
7. Box is included. Artwork by Christian Cruz as always.
8. Installation options will be added later. As per my previous projects this will be done by Giovanny from Aldani Customs
9. Weathering option will be available
At the moment I have quoted 50 units in total of each; this can change based on the demand. However 50 minimum will be made to keep the cost low.
Final Cost: $275
Interest list is now open. Thank you for your support as always.
