Home Alone 2

Some paper props I made (usual and unusual):

Image33.png Dad's Baggage ID Card.png
Made as 80 x 40 mm.

Image35.png AWEFS VHS Cover Side Label v1.png AWEFS VHS Cover Side Label v2.png
The 1st version is 155 x 25 mm, while the 2nd version is 177 x25 mm.

Image41.png McCallister Family Photo 2.png
This is 120 x 74 mm.

Image85.png Image89.png Image89_2.png The Plaza Hotel Note.png The Plaza Hotel Note Back.png
This one is made as an A4 (210 x 297 mm). The back should be printed upside down and there are some fine lines to help you fold the paper ready to be tied to a brick.

There's another variant of the back of the letter seen in the breaking the window scene:
Image74.png The Plaza Hotel Note Back Variant.png
The top margin (above the logo) seems to be folded, so I made this with the logo and text on the middle of the page.

Image84.png Sticky Bandits Evidence Cassette Label.png
Print it as 88 x 9 mm.

Image90.png McCallister Family Photo 3.png
This photo can be found all over the internet. Print it as 160 x 106 mm.

Everything was made from scratch. The photos were enhanced with Topaz Photo AI and small adjustments/modifications were made where needed.
 
Great Job. Any idea of the correct size for the duncan letter? I think it is smaller than a4. Some Kind of a hotel note paper sheet. Maybe around a5?
 
Thanks!

A5 is too small. If you look at the image with Mr. Duncan holding the note, you'll notice that the paper is roughly folded in 3 and his hand/palm covers 1/3rd of the paper. The width of a medium palm is around 100mm, hence the height of the page is close to 300 mm. A standard LTR will work too.
 
I tried (with partial success) to enhance the Sticky Bandits polaroids:
View attachment 1782575 View attachment 1782576

Because the faces on the 2nd photo were low-res I copy/paste the faces from the 1st photo.

And as a bonus, here are 4 photos as they would appear right after Kevin shot them in the movie:
View attachment 1782578 View attachment 1782579 View attachment 1782580 View attachment 1782581

All the photos have 100 x 100 mm in size.
Way better then what I used.
 
Some paper props I made (usual and unusual):

View attachment 1781787 View attachment 1781788
Made as 80 x 40 mm.

View attachment 1781789 View attachment 1781790 View attachment 1781791
The 1st version is 155 x 25 mm, while the 2nd version is 177 x25 mm.

View attachment 1781792 View attachment 1781793
This is 120 x 74 mm.

View attachment 1781794 View attachment 1781795 View attachment 1781796 View attachment 1781798 View attachment 1781797
This one is made as an A4 (210 x 297 mm). The back should be printed upside down and there are some fine lines to help you fold the paper ready to be tied to a brick.

There's another variant of the back of the letter seen in the breaking the window scene:
View attachment 1781799 View attachment 1781801
The top margin (above the logo) seems to be folded, so I made this with the logo and text on the middle of the page.

View attachment 1781802 View attachment 1781803
Print it as 88 x 9 mm.

View attachment 1781804 View attachment 1781805
This photo can be found all over the internet. Print it as 160 x 106 mm.

Everything was made from scratch. The photos were enhanced with Topaz Photo AI and small adjustments/modifications were made where needed.
Any chance you've been able to find the same ID card luggage holder?
 

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top