Limited project run for R2-D2 Front Flashing Optic bezels.
This is a limited project run for the components needed to assemble aluminum a True Historic front flashing optic bezels.
This is the for the front flashing optics detail on the head of Artoo Detoo from the original props.
These have been manufactured to have the correct sharp interior corners.
There are no incorrect tool radius fillets on the inside corners that would be noticeable if cut from a single piece of aluminum.
This will require welding (like the originals) or can also be assembled by brazing or gluing.
Each bezel is a passthrough cost from the manufacture of $40 each or $80 for the required set of two.
With the extremely low volume of the run each shipping charge would be additional and calculated separately for each shipment.
Schedule
These have been delivered from the manufacture on 04/01/2021 and are available for immediate shipping.
Providence
These were made to the OpenR2 True Historic RC spec modeled from a laser scan of original authenticated aluminum bezels.
Sign Up List
01 - $40 - SOLD - (Delivered) - 04/01/2021
02 - $40 - SOLD - (Delivered) - 04/01/2021
03 - $40 - SOLD - (Delivered) - 04/01/2021
04 - $40 - SOLD - (Delivered) - 04/01/2021
05 - $40 - SOLD - (Shipped) - 04/02/2021
06 - $40 - SOLD - (Shipped) - 04/02/2021
07 - $40 - SOLD - (Paid) - 04/03/2021
08 - $40 - SOLD - (Paid) - 04/03/2021
09 - $40 - SOLD - (Paid) - 04/03/2021
10 - $40 - SOLD - (Paid) - 04/03/2021
11 - $40 - SOLD - (Paid) - 04/03/2021
12 - $40 - SOLD - (Paid) - 04/03/2021
This is a limited project run for the components needed to assemble aluminum a True Historic front flashing optic bezels.
This is the for the front flashing optics detail on the head of Artoo Detoo from the original props.
These have been manufactured to have the correct sharp interior corners.
There are no incorrect tool radius fillets on the inside corners that would be noticeable if cut from a single piece of aluminum.
This will require welding (like the originals) or can also be assembled by brazing or gluing.
Each bezel is a passthrough cost from the manufacture of $40 each or $80 for the required set of two.
With the extremely low volume of the run each shipping charge would be additional and calculated separately for each shipment.
Schedule
These have been delivered from the manufacture on 04/01/2021 and are available for immediate shipping.
Providence
These were made to the OpenR2 True Historic RC spec modeled from a laser scan of original authenticated aluminum bezels.
Sign Up List
01 - $40 - SOLD - (Delivered) - 04/01/2021
02 - $40 - SOLD - (Delivered) - 04/01/2021
03 - $40 - SOLD - (Delivered) - 04/01/2021
04 - $40 - SOLD - (Delivered) - 04/01/2021
05 - $40 - SOLD - (Shipped) - 04/02/2021
06 - $40 - SOLD - (Shipped) - 04/02/2021
07 - $40 - SOLD - (Paid) - 04/03/2021
08 - $40 - SOLD - (Paid) - 04/03/2021
09 - $40 - SOLD - (Paid) - 04/03/2021
10 - $40 - SOLD - (Paid) - 04/03/2021
11 - $40 - SOLD - (Paid) - 04/03/2021
12 - $40 - SOLD - (Paid) - 04/03/2021
Last edited:
