Stranger things

[RafalFett]

Indeed, you already shared that poster. I usually check my downloaded files before I post, but it seems I forgot to download the images from that post.

 

[ribeiroorafael]

.

 

[UnusualWizardry]

Or maybe this sticker could be from Cult of Set Holy Symbols (Conan the Barbarian)?

Personally I'm not seeing two snakes, but a sort of devil looking guy with big horns

 

[UnusualWizardry]

Hey everyone! I am very busy for a few weeks here, but found the time tonight to get this up for you all.

Here are all of Max's Stickers from her Season 2 Skateboard!
Special Thanks to ribeiroorafael for helping to identify some of them - I know he's been very eager for me to get these posted.

These are scans of the actual vintage stickers the designs were sourced from for the most part (two of them were from redbubble).

Like Nancy's Trapper Keeper - you mostly need to use reprinted scans for maximum accuracy.
For example, hyper neon stickers look far more desaturated when scanned - this matches how these look in the show - plus, one of them was shiny originally, but after scanning in those areas appear black - which matches how the sticker appears in the show.

One notable exception is the final Madrid sticker seen below.
This one appears to be the original sticker in the show, as it is printed on transparency, like it is in the show.

Below are all the stickers presented as individual png files at 300dpi and shaped and sized correctly for how they appear on her board (for example, the Wizard and Whale stickers were greatly enlarged for her board).










I used these files for my replica of her skateboard and I am thrilled with how it turned out!
(Again, besides the original Madrid sticker)



Now, as discussed earlier in this thread, the modern replicas of her board are not perfect.
Specifically, the design is a bit too large so the scaling of everything related to the hardware is off.

Therefore, I had to compromise on exact placement in relation to the design - especially near the top (my board has the design scaled up and more offset towards the top). But I did my best and decided, in this case, to just deal with the inaccuracies in the placement relating to the design.

Hope everyone enjoys!

 

[RafalFett]

These are great! Thanks for sharing!

 

[UnusualWizardry]

These are great! Thanks for sharing!

No problem. If I ever got ahold of her Season 3 board + stickers I'll try to share those ones too.

 

[RafalFett]

Here are some props identified by ribeiroorafael and/or UnusualWizardry; some of them were scanned by a 3rd party, I just cleaned up/enhanced, in some cases even the text was fully redone with accurate or close to accurate fonts. Other props were image downloads from various online sources and suffered the same clean up/enhance routine with the text fully redone:

Hi-res here ==> Britain Wales Poster.png & Britain Scotland Poster.png.

The difference between the versions is: v1 cleaned up scans and v2 fully vectorized.


Hi-res here ==> Let's Be Pals Poster.png


Hi-res here ==> Snap-on 86 Calendar Cover.png & Snap-on 86 Calendar Mar-Apr.png & Snap-on 86 Calendar Jul-Aug.png.



(books are in the 1st screenshot between Dustin and Lucas, in the 2nd screenshot on the shelve, lower left corner).

 

[UnusualWizardry]

I had shared this replica I completed with ribeiroorafael and he requested I share the design, so here we are.

The Chocolate Pudding label from Season 1.


If you print this on some glossy sticker paper, you can cut it out and wrap it around a matching Vienna Sausage can, just like Lynda Reiss did for the show.

Here is my own replica made using this file:


Some reference images:




Enjoy!

 

[RafalFett]

Thanks!

 

[optimus51]

Hey hey,

Because it was Stranger Things Day last week, I finally decided to print out some of the props here, and assembled them on a board. I believe many are from UnusualWizardry and RafalFett , but I would just like to thank ALL the contributors to this forum. The number and quality of paper props that have been posted here is amazing. It is really heartening to see that there is still so much enthusiasm for Stranger Things... we can only hope that Season 5 will be here soon!

 

[OasisSupernova]

Hey hey,

Because it was Stranger Things Day last week, I finally decided to print out some of the props here, and assembled them on a board. I believe many are from UnusualWizardry and RafalFett , but I would just like to thank ALL the contributors to this forum. The number and quality of paper props that have been posted here is amazing. It is really heartening to see that there is still so much enthusiasm for Stranger Things... we can only hope that Season 5 will here soon!

Looks great. Great idea!

 

[KJohan]

Thanks to ribeiroorafael and his friend (who scanned the files), I can now add the Secret Russian Content to my Doctor Collector Box:
View attachment 1824434 View attachment 1824435 View attachment 1824436 View attachment 1824437 View attachment 1824438 View attachment 1824439 View attachment 1824440 View attachment 1824441 View attachment 1824442 View attachment 1824443 View attachment 1824444 View attachment 1824445 View attachment 1824446 View attachment 1824447 View attachment 1824448 View attachment 1824449 View attachment 1824450 View attachment 1824451 View attachment 1824452 View attachment 1824453 View attachment 1824454 View attachment 1824455 View attachment 1824456

And here are the files slightly cleaned up (mostly the envelope and Yuri's pilot card) and the Key Blueprint stitched together:
View attachment 1824458 View attachment 1824459

The envelope should be printed on a thicker paper (around 150-180 gr); the flat file measures 262 x 424 mm, while fully closed is 232 x 172 mm. The second file have some extra flaps and can be printed on 3 pages of A4 or LTR paper.

View attachment 1824464 View attachment 1824465 View attachment 1824466

Yuri's Pilot Card can be made using the template printed and glued on a thicker cardboard, then cut along the contour; the middle lines are for folding. The cover is then glued centered on the cardboard and the extra material is cut, glued and fold to the inside of the card:
View attachment 1824475 View attachment 1824476
(Note that these images are from the Loki thread about the making of the Official Handbook replica)

The Inside print is then glued again centered to the inside of the card. The finished card measures 210 x 74 mm when opened.

The Key Blueprint stitched together with minimal cleaning. Some of the writing and details are crispier, but some areas are blurry or lo-res. I don't know if the file is that way or in the scanning process the image had suffered some changes (maybe UnusualWizardry can confirm this on most files from the Secret Russian Content):
View attachment 1824488

This blueprint has only 150 DPI, but a better version can be downloaded from my Google Drive along with the other files (the envelope is also in better resolution, not necessarily better quality) ==> Secret Russian Content - Google Drive. The size of the blueprint is around 550 x 392 mm.

And the pages of Hopper and the Demogorgon (higher DPI in the shared folder):
View attachment 1824496 View attachment 1824495 View attachment 1824491 View attachment 1824492 View attachment 1824493 View attachment 1824494

These should be printed on a standard A4 (297 x 210 mm) on both sides.

Again, huge thanks to ribeiroorafael and his friend for the scans, which is the foundation of these files.

Letters and words of the native Russian language!