-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Limited Run Luke / Vader ANH shared stunt saber kit
1 for me, please 
Thank you to the new people that signed upPut me down for one! Will you be replicating the early folmer red button? This will be an amazing addition to the collection, the first “real” lightsaber!
Edit: after more *carefully* reading the post I see the run is only for the main hilt parts! I’m still interested, just thought I would save you trouble of reiterating that information
Still a bit early to answer 100%, but no worries, I knew that people would need those and I have been discussing with Roman as well
I prefer that he announces this, and again it's still early for this, but folmer glass eyes are already in the works for his new telegraph replica and there should be good news for the red button as well
Team work for the win again, thank you Roman
amnesia0287
Active Member
Ooo. I’m interested in 1-2. I like stunt hilts.
Thank you to the new people that signed up
Still a bit early to answer 100%, but no worries, I knew that people would need those and I have been discussing with Roman as well
I prefer that he announces this, and again it's still early for this, but folmer glass eyes are already in the works for his new telegraph replica and there should be good news for the red button as well
Team work for the win again, thank you Roman
You know what, Im also in for a second!
Luke Warmwater
Sr Member
I'm in for one!
I'm in for one - thanks!
Hunter120844
New Member
I’m in for one.Hi everyone,
You guys know I'm busy, and this wasn't planned, but I have been asked by a customer if I could make a Luke ANH stunt, the aluminium tube saber, for him.
I don't like to say no, so, I have spent the last two days, researching, gathering references and working on a 3D model and photo matches of the saber, and I would like to see if there is a little bit of interest for a small run of those instead of just doing one for my customer
View attachment 1787786
The idea is that i would offer the 3 main parts of the saber and people would source the regular parts, clamp, red button, glass eye, grips and bubble strip.
the kit would look like this:
View attachment 1787782
The bottom is based on a Kobold bottom. there are no cristal clear references of the bottom, but we can see a hole clearly and a shiny line at the bottom of the tube that makes me think it is possibly like that. Bottom would be glued, core would be held by one set screw (visible in the refs)
holes for the red button and glass eye would be threaded.
Folmer red button and glass eye: Roman has told me and announced on facebook that he is on board to replicate those, folmer glass eyes are already in production for his telegraph replica
Price:
If I get 10 people: around 75€ + shipping
we got 20 people, so: around 65€ + shipping
- I'm saying "around", because the price is calculated without a prototype and I need to get some slack in case production takes more time than planned, I hope you guys understand in case the price goes up a little bit. I'll try my best to be at the announced price of course
- this is a base price for the 3 parts above. Discussing with other people, we have already identified a ball bearing in the emiter and might add other details along the way that could push the price further. We will see how this evolves.
Interest will run until the end of next week, 18th of february. it's a simpler smaller run, I don't want to keep my customers waiting too long.
If you are interested, please post here quickly. My last run, the Barbican sabers, I multiplied the interest by 1.3, and all sabers got spoken for without even making it to the website. So please just be aware of this, and don't count on possible extras along the way, I need to get as clear an idea as possible from the start
payment will be made when the kits are finished as always
An assembled kit with the extra parts would look like this:
View attachment 1787783
View attachment 1787784
View attachment 1787785
I'll post all the 3D model match to the refs in the next post to keep this post clearer.
thank you all!
for those that know me, you know how this all works now, if you don't know me, you can find all details in the spoiler tag bellow to keep this thread clean
cheers all!
How/Where to buy when ready:
As usual, everything I sell can only be purchased on my website, supergreenprops.com:
Supergreen props - Handcrafted collectibles
I am obligated by the French law to edit an invoice for any money that goes into my bank account and the invoices have to be sequenced. The only way for me to handle that is through my website. It is easy for you, the website is fun and bilingual, it is perfectly secured and the payments completely handled by Paypal. You just need to register, enter your shipping address and the shipping costs will be calculated automatically. Make sure to enter your address as soon as you create your account as shipping costs are shown for France by default.
I know that some people might feel uncomfortable with a website, but please understand that I have no choice and that, even though there is a website, it’s still me, eethan/Matthieu, behind everything and you can reach out anytime for any question here or by mail contact@supergreenprops.com
I’ll always be happy to help or have a chat; really, you know I’m a friendly and talkative guy and love to talk about cool props, so, don’t hesitate!
Payment:
As explained above, I am obligated by the law to edit a sequenced invoice with all my sales, this goes exclusively through my website. The payments are completely handled by Paypal checkout, with buyer protection, and you can choose to pay directly with paypal, credit cards through Paypal (even if you don’t have a Paypal account), or even local payment options like iDeal, Sofort, Bancontact, Giropay, MyBank, P24, EPS... At no time will I have access to your payment information or bank details, never. When the order is paid, you’ll receive confirmations by mail for every step of the order and an invoice.
Shipping:
When you are logged in and have created an address, shipping costs are automatically calculated in your cart. There are two options, less than 3cm in thickness or more than 3cm. I encourage you to take the less than 3cm option when available as it is much cheaper and still tracked
All shipments are shipped with the French post service and tracked; you’ll receive the tracking number by mail when the package ships. It can be tracked directly on your local post website, usps, royal mail and so on. No need to use the French post website link included in the shipping notice mail if you are not in France. If you didn’t receive a tracking number, please check in your spam folder or don’t hesitate to contact me, it’s important to get it
Shipping time varies greatly and we all know it has been pretty unreliable lately, however, to give you an idea, it should usually take between 5 to 12 working days to get from France to the US, there can be some rare wild exceptions that I sadly can’t foresee, however, so far, I have never had a lost package, so fingers crossed, it continues that way!
Customs taxes:
All orders are shipped from France. If you are outside Europe, it is possible that your country collects customs taxes or fees, I can only let you know that this is a possibility and encourage you to know how your country deals with international packages and know if you have to pay taxes and how much they are. Please understand that this is out of my control.
Always eco-friendly whenever possible:
As I explain on my website, I try to be as eco-friendly as possible. I live and work in a farm in the south of France, I have all kind of animals around me and we try to respect nature as much as possible. We have a hedgehog in the garden and a lot of bees coming back lately, so hopefully things are taking a better turn!
This kind of work, let's be honest is not by definition eco-friendly since it's purely for our enjoyment and not something we all need to survive (or do we?). That being said, I do my best to always use recycled and recyclable shipping materials or even clean re-used materials sometimes. I also try to do as much as I can for the projects themselves.
By the way, the French post service that I’m using is 100% carbon neutral since 2012 that is only for France obviously, but that’s already something I guess
Hello there,
thank you to the people that have joined up in the last few days!
Interest is still running until Sunday, February 18th. please sign up if you are interested, the run is starting to grow and I might limit the numbers after a while.
I have been working on the model a bit more, refining the shape as much as possible and adding the newly discovered second set screw in the emiter as well as the ball bearing hidden under the blade
Let me be honest for a minute, I am always trying to do my best regarding the price and very often bleeding myself to death by announcing a lower price than humanly possible and having to stick to it. I made a small mistake on that run, trying to prepare everything quickly, I have an excell file to calculate my project costs and I forgot to multiply the materials by the number of kits! I counted the materials price of one kit for the whole run!
Luckily, material cost is pretty low on that run and interest is a bit larger than I anticipated, so, this balances out a bit and I end up not too far off!
But, I have edited the price slightly, correcting that mistake and taking the new ball bearing part into account. and we are now around 75€ + shipping. It is the base price that was announced for 10 kits, and we now have an extra detail added. I really hope this is ok for every one
Please keep in mind this might evolve, or options might become available depending on what comes up discussing with other people. But this is now the price for the base kit with the 3 main parts, 2 sets screws and 1 ball bearing.
cheers all!
thank you to the people that have joined up in the last few days!
Interest is still running until Sunday, February 18th. please sign up if you are interested, the run is starting to grow and I might limit the numbers after a while.
I have been working on the model a bit more, refining the shape as much as possible and adding the newly discovered second set screw in the emiter as well as the ball bearing hidden under the blade
Let me be honest for a minute, I am always trying to do my best regarding the price and very often bleeding myself to death by announcing a lower price than humanly possible and having to stick to it. I made a small mistake on that run, trying to prepare everything quickly, I have an excell file to calculate my project costs and I forgot to multiply the materials by the number of kits! I counted the materials price of one kit for the whole run!
Luckily, material cost is pretty low on that run and interest is a bit larger than I anticipated, so, this balances out a bit and I end up not too far off!
But, I have edited the price slightly, correcting that mistake and taking the new ball bearing part into account. and we are now around 75€ + shipping. It is the base price that was announced for 10 kits, and we now have an extra detail added. I really hope this is ok for every one
Please keep in mind this might evolve, or options might become available depending on what comes up discussing with other people. But this is now the price for the base kit with the 3 main parts, 2 sets screws and 1 ball bearing.
cheers all!
I'm in for one.
maicotattoo
New Member
I'm in for one
868 is a tapered bearing, no?
From what I measured on the pictures with my 3d model, I'm currently going with a 698-2RS 8x19x6mm bearing.
If you have any input on this or blade attachment though, feel free to get in touch. I have read so many threads this past few days and I see no conclusive evidences on anything!
So any help is welcomed
Similar threads
