Deluxe Kit:
If you're interested in getting a kit, please feel free to post a reply with number of kits and which type (i.e. One Deluxe Kit).
Please be aware that none of the kits include the stylus (Rectangular), flash hider, push rods, nor imperial disks. These parts can be purchased from Field Marshall and/or Etsy.
Parts List:
Side Rods (2x per kit) : $30
Side Rod Points (2x per kit) : $38
Sight Rod w mount: $18
Sight Rod mount: $10
Rear sight: $17
Cast Black Resin Pontoon (in stock): $6 each
Barrel Extension: $43
Trigger Guard (Resin): $15
COAX Reducers (2x per blaster): $3 each ($6)
Rear black cap: $1 (Free with Kit)
Trigger Guard (Aluminum): $80 (by Request)
Standard Kit (Includes all parts above-one Pontoon included-accept the Trigger Guard and COAX reducers): $152
Full Kit (Includes all the parts above - one Pontoon included - accept COAX reducers): $167
Deluxe Kit (Includes all the parts above - one Pontoon included): $173
What you will need to complete your blaster: Tone arm rectangles (2x), Reade Model Kit rods (2x), Imperial Disks (2x) and Flash Hider/Grill (1x).
These parts can be purchased from FieldMarshall via vmusicstore on ebay. Imperial disks can be found on Etsy. MK1 Ruger Airsoft Pistols can be found on Amazon and eBay. Please see below for more information about these parts.
Update (as of 3/5/25): Starting a new waiting list.
Machining start date: ?
Waiting list for parts (2025):
1. Strikebackprops - 1 Deluxe Kit
2. Halliwax - 1 Deluxe Kit
3. Makermelton - 1 Deluxe Kit
4.
5.
6.
7.
8.
9. Spare
10. Spare
Waiting list for parts (2023):
1. Propcollector - 1 Standard Kit (3/28 - Dropped) (Sold)
2. History Hunter - 3 sets of Side Rod parts (Shipped 3/15)
3. Djedi - 2 standard kits + 4 coax connectors + pontoon (Paid 3/29 - Shipped 3/30)
4. Tatooine Machine - 1 standard kit (Paid/Shipped 7/27)
5. lmc3 - 1 Deluxe Kit + Pontoon part + end cap (Paid 3/30 - Shipped 4/2)
6. TK42434 - 1 Full Kit (3/29 - International shipping - Dropped) (Sold)
7. DamnYankee123 - Deluxe Kit (Paid 4/3 - Shipped 4/5)
8. Legon750 - Deluxe Kit (Paid 3/30 - Shipped 4/2)
9. Captain Dunsel - Deluxe Kit (Paid 3/30 - Shipped 4/2)
10. Mechrep - Deluxe Kit (Paid 5/4)
11. Hunter120844 - Deluxe Kit (Paid 3/30 - Shipped 4/2)
12. Spare - Deluxe kit (Sold 12/10)
Waiting list for kits (2021):
1. JetSetWilly (Deluxe Kit) - Paid 8/23/Shipped 8/27
2. dse2187 (Deluxe Kit) - Paid 8/24/Shipped 8/28
3. JLinNY (Deluxe Kit) - Paid 8/27/Shipped 8/27
4. Gaffer (Standard Kit with aluminum trigger guard) - Paid 9/8/Shipped 9/10
5. CE (Deluxe Kit) - Paid/shipped
6. Rattlesnake toys (Deluxe Kit) - Paid 8/23/shipped 8/28
7. Spare (Deluxe Kit) - Paid/Shipped 9/17/21
8. Darthwilder (Aluminum trigger guard - real rugger, 2 side rods with points) - Paid 9/9/Shipped 9/10
Additional parts info:
Original Reade Model flash hiders, small "push rods" and machined Rectangular stylus parts for the side rods are available on ebay:
DL44 Hansolo ANH 3 cylinder "READE MODELS" heat sinks ,sight greeblies KIT | eBay
DL44 Hansolo AMH 3 cylinder heat sink greeblies KIT. Original found parts made by READE models for the anh front heat sink and sight greeblies.
www.ebay.com
Rectangular stylus parts on eBay
Replica Rugers (by KJWorks or KJW) like the one pictured below are available on Amazon, listed as "MK1 Gas Airsoft Pistol".
Barrel Extension Install:
Use a ruler to mark the brass rod a little over 2" from the end (about 2 1/16"). Use a hacksaw to cut off the 2".
Use a belt sander to round off the edges of the brass tube. A file and/or sandpaper can also be used. Test fit the barrel extension. Be sure to turn the part so that the notch is near the top of the barrel:
Once fitted in place, use a small tool to tighten the set screw near the bottom edge of the barrel extension.
My Blaster:
Last edited:
