Unlimited Run Kingsman Conversion Pistol Kit

takemymoney.jpg
 
Update! I had to mold the barrel THREE times because I kept running into issues. But I really wanted to make a hollow barrel for you guys, not a plugged one. I finally got there after almost walking away from the project.

Sound off if you would like a raw kit. Otherwise the kits will come together, sanded, gap filled and ready for paint. For the raw kit, there is a space left between the barrel and the barrel attachment that will give you space for your mechanism to swing. If it was flush it wouldn't allow the barrel to move. But if you opt for a regular kit, that space will be filled. If you don’t specify, you’ll get the assembled kit that is ready for paint.
 
Last edited:
Here is a picture of that gap on the raw kit. I was thinking you could split the furthest point on the barrel attachment and barrel then add a small plastic piece. Then you could drill out the faux pins and add a real one. But that’s just a thought and I’ll leave it up for you guys.

83A066D3-047C-4513-A884-275D948052EF.jpeg
 
I’ll be contacting you individually as I finish your pieces. Thank you for your patience!
 
Hey, any chance I could still get in on this? Would love an assembled one.
Sure, it will take me some time to get it casted and assembled.

Kits are finally done! I’m a bit of a perfectionist so I had to pull myself back. These barrel assembly are pretty much ready for paint. There maybe some small imperfections but they are a kit after all!

Thank you for patience!

AC659DE6-1914-451D-A498-78FFE18CC3A9.jpeg
 
Can you post some pics of the kit on an airsoft replica?

Sure not quite finished though.

Looks great! Any word on the instructional video?

Yes! Almost finished with the first video which will tackle disassembly and prepping the piece.

Here is the under barrel on a WE Tech. This is to give you an idea on how if the trigger guard you need to trim.

15E12C02-ABC3-42E5-944D-4DFD9650F365.jpeg
 
Back
Top