The Skywalker Compass from The Last Jedi
Seen in Lukes Hut on Ach-To and in Ben Solos room.
This Prop was Originally 3d printed within a 24hr period from the concept design of Matthew Savage.
We’ve taken all reference from the film as well as various shots from the Lucas Ranch.
It caught our attention and needed to be made to perfection.
This has been upgraded to a Limited Run.
Our Mold is currently being cold cast by Kurosawa
Model was Designed by Dan Coggins @DanLabsinc
Internal Details Designed by Josh Howe
Research Conducted by Josh Howe and Myself.
Build Fit Video
· Molded Cold Cast
· Brass Details
· Ceramic Bearing
· Brass Hinge
Hours upon Hours of speculation/sizing/measuring/modeling were put into this to make this the most accurate to date to bring this to the RPF public.
Based on Material Cost
Casting/Labor/Materials/Shipping
Thanks everyone for your patience on this project. We are finally prepared to start taking deposits.
With that being said we have decided to offer the compass in two different kits instead of a complete compass.
A cold cast kit
And a raw resin Kit.
Each kit will come will all of the parts needed to complete the compass.
We are getting some fresh parts made for some new pictures of the Kits
There are pictures of the parts in thread # 72
So each Kit will include as follows.
Cold Cast: - Cold Cast Lid - Cold Cast Middle - Cold Cast Base - Cold Cast Button - Laser Cut Inside Base - Laser Cut Inside Base Ring - Laser Cut Inside Detailed Ring - Laser Cut Inside Lid Ring - Machined Brass Lid Clasp - Brass Hinge - Brass Pin - Brass Tubes for the lid (x3) - Brass Tubes for the base (x3) - Lid Magnets (x2) - Stainless Steel Bearing - Resin cast half marble - Resin cast marble housing - Resin cast spinning part
Resin Cast: - Resin Cast Lid - Resin Cast Middle - Resin Cast Base - Resin Cast Button - Laser Cut Inside Base - Laser Cut Inside Base Ring - Laser Cut Inside Detailed Ring - Laser Cut Inside Lid Ring - Machined Brass Lid Clasp - Brass Hinge - Brass Pin - Brass Tubes for the lid (x3) - Brass Tubes for the base (x3) - Lid Magnets (x2) - Stainless Steel Bearing - Resin cast half marble - Resin cast marble housing - Resin cast spinning part
The Acrylic Parts may come in different Colors. They will all need to be painted so the base color is irrelevant.
Everything pictured is included in the kit.
Deposits will be 150 USD
A cold cast kit will cost 275 USD
A raw resin kit will be 225 USD
Shipping will be determined when we are ready to ship.
The compasses will be produced in lots of 5 and should take about 2 or 3 weeks to complete.
Paypal Address for deposits is : PLEASE PM ME FOR PAYPAL ADDRESS
Deposits are non refundable.
If you have any questions please ask.
Batch One
1 Halliwax (deposit Made ) Cold Cast Kit) Paid in full. (SHIPPED
2 Peter Buckholtz (Deposit Made) Cold Cast Kit) Paid in Full (SHIPPED
3 R2Dan (Deposit Made) Cold Cast Kit.) Paind in Full (SHIPPED
4 CrankyScorpion Deposit made)Cold Cast Kit) Paid in Full (SHIPPED
5 DJcbooks81 (Deposit Made) Cold Cast Kit) Paid in Full (SHIPPED
Batch Two
1 PhantomPickle (Paid in Full Cold cast Kit.) SHIPPED
2 Eden Am (Deposit Made)(PAID IN FULL Cold Cast Kit)( Paid for Finished Compass)
Final 4 : We have enough to make 5 More Kits or finished Compasses.
1 StarWarrior (Deposit Made)(PAID IN FULL Cold Cast Kit)( Paid for Finished Compass)
2 Sarnac (Deposit Made) Cold Cast Kit
3 Oddballfett (Deposit Made)(PAID IN FULL Cold Cast Kit)( Paid for Finished Compass)
4 BeggarsCanyon ( Spot on hold waiting for parts)
GREAT NEWS
We have three more available. and that will be it.
1:RoninTreeFrog (Deposit Made)(PAID IN FULL Cold Cast Kit)( Paid for Finished Compass)
2:ZombieBait (Deposit Made)(PAID IN FULL Cold Cast Kit)
3:Richard G : (Deposit Made)(PAID IN FULL Cold Cast Kit)( Paid for Finished Compass)
**********>>>>>>>>>UPDATE<<<<<<<<********************
So our friend Kurosawa has informed me that he is willing to Take on the Hard task of completing some compasses for us. So the remaining compasses that are made can be offered as a complete compasses assembled and painted. The cost will be 105 USD extra.
The Kits will Still be sold as well for anyone wanting to finish it themselves.
These last few compasses that are made will be the end of this run and for the time being they will be the only ones made. If there is an interest for a second run will we cross that bridge when we get there.
Seen in Lukes Hut on Ach-To and in Ben Solos room.
This Prop was Originally 3d printed within a 24hr period from the concept design of Matthew Savage.
We’ve taken all reference from the film as well as various shots from the Lucas Ranch.
It caught our attention and needed to be made to perfection.
This has been upgraded to a Limited Run.
Our Mold is currently being cold cast by Kurosawa
Model was Designed by Dan Coggins @DanLabsinc
Internal Details Designed by Josh Howe
Research Conducted by Josh Howe and Myself.
Build Fit Video
· Molded Cold Cast
· Brass Details
· Ceramic Bearing
· Brass Hinge
Hours upon Hours of speculation/sizing/measuring/modeling were put into this to make this the most accurate to date to bring this to the RPF public.
Based on Material Cost
Casting/Labor/Materials/Shipping
Thanks everyone for your patience on this project. We are finally prepared to start taking deposits.
With that being said we have decided to offer the compass in two different kits instead of a complete compass.
A cold cast kit
And a raw resin Kit.
Each kit will come will all of the parts needed to complete the compass.
We are getting some fresh parts made for some new pictures of the Kits
There are pictures of the parts in thread # 72
So each Kit will include as follows.
Cold Cast: - Cold Cast Lid - Cold Cast Middle - Cold Cast Base - Cold Cast Button - Laser Cut Inside Base - Laser Cut Inside Base Ring - Laser Cut Inside Detailed Ring - Laser Cut Inside Lid Ring - Machined Brass Lid Clasp - Brass Hinge - Brass Pin - Brass Tubes for the lid (x3) - Brass Tubes for the base (x3) - Lid Magnets (x2) - Stainless Steel Bearing - Resin cast half marble - Resin cast marble housing - Resin cast spinning part
Resin Cast: - Resin Cast Lid - Resin Cast Middle - Resin Cast Base - Resin Cast Button - Laser Cut Inside Base - Laser Cut Inside Base Ring - Laser Cut Inside Detailed Ring - Laser Cut Inside Lid Ring - Machined Brass Lid Clasp - Brass Hinge - Brass Pin - Brass Tubes for the lid (x3) - Brass Tubes for the base (x3) - Lid Magnets (x2) - Stainless Steel Bearing - Resin cast half marble - Resin cast marble housing - Resin cast spinning part
The Acrylic Parts may come in different Colors. They will all need to be painted so the base color is irrelevant.
Everything pictured is included in the kit.
Deposits will be 150 USD
A cold cast kit will cost 275 USD
A raw resin kit will be 225 USD
Shipping will be determined when we are ready to ship.
The compasses will be produced in lots of 5 and should take about 2 or 3 weeks to complete.
Paypal Address for deposits is : PLEASE PM ME FOR PAYPAL ADDRESS
Deposits are non refundable.
If you have any questions please ask.
Batch One
1 Halliwax (deposit Made ) Cold Cast Kit) Paid in full. (SHIPPED
2 Peter Buckholtz (Deposit Made) Cold Cast Kit) Paid in Full (SHIPPED
3 R2Dan (Deposit Made) Cold Cast Kit.) Paind in Full (SHIPPED
4 CrankyScorpion Deposit made)Cold Cast Kit) Paid in Full (SHIPPED
5 DJcbooks81 (Deposit Made) Cold Cast Kit) Paid in Full (SHIPPED
Batch Two
1 PhantomPickle (Paid in Full Cold cast Kit.) SHIPPED
2 Eden Am (Deposit Made)(PAID IN FULL Cold Cast Kit)( Paid for Finished Compass)
Final 4 : We have enough to make 5 More Kits or finished Compasses.
1 StarWarrior (Deposit Made)(PAID IN FULL Cold Cast Kit)( Paid for Finished Compass)
2 Sarnac (Deposit Made) Cold Cast Kit
3 Oddballfett (Deposit Made)(PAID IN FULL Cold Cast Kit)( Paid for Finished Compass)
4 BeggarsCanyon ( Spot on hold waiting for parts)
GREAT NEWS
We have three more available. and that will be it.
1:RoninTreeFrog (Deposit Made)(PAID IN FULL Cold Cast Kit)( Paid for Finished Compass)
2:ZombieBait (Deposit Made)(PAID IN FULL Cold Cast Kit)
3:Richard G : (Deposit Made)(PAID IN FULL Cold Cast Kit)( Paid for Finished Compass)
**********>>>>>>>>>UPDATE<<<<<<<<********************
So our friend Kurosawa has informed me that he is willing to Take on the Hard task of completing some compasses for us. So the remaining compasses that are made can be offered as a complete compasses assembled and painted. The cost will be 105 USD extra.
The Kits will Still be sold as well for anyone wanting to finish it themselves.
These last few compasses that are made will be the end of this run and for the time being they will be the only ones made. If there is an interest for a second run will we cross that bridge when we get there.
Attachments
Last edited: